Georgi Yanev

šŸ“˜
All the things...

How to keep your U.FL IPEX antenna in any position you want?

Georgi Yanev
April 12, 2019

Iā€™d like to share with you one quick and easy way of fixing a U.FL IPEX VTX antenna to stay in any way you want it to. For example, at a 90 degree angle and up and away from the props, which could be a good thing.

Fix U.FL IPEX antenna in position

To achieve this, grab a small piece of shrink tube, apply some hot glue all around where the antenna connects to the VTX. Then apply a bit of hot glue all along the antenna up until the thicker part. Finally, slide in the heat shrink, shrink it with a lighter or a heat gun and hold it in place until the hot glue cools off.

I learned about this trick from this video, and so credit goes, where credit is due!

Did I miss something?

Ask a question and see it updated in the article, alongside with credit for you.

Question/suggestion:

Thanks for your suggestion!

Support the blog:

I hope you find my content helpful. If you'd like to support the blog, you can do so by clicking the affiliate links below before making a purchase. This comes at no additional cost to you.
AmazonBanggood
Or you can buy me a coffee via paypal and support me on Patreon.
PayPalPatreon