How to flash the Taranis Q X7 internal module(XJT)?

April 19, 2019
  1. Go to FrSky’s site and download the firmware (direct zip link).
  2. Unzip the archive and put it on your radio’s SD card in the FIRMWARE directory.
  3. From the radio setup screens find the one with the SD card contents and go into the FIRMWARE directory. Long press on the firmware you want to flash and select flash internal module. Pay attention to the EU and US versions.

Did I miss something?

Ask a question and see it updated in the article, alongside with credit for you.


Thanks for your suggestion!

Support the blog:

I hope you find my content helpful. If you'd like to support the blog, you can do so by clicking the affiliate links below before making a purchase. This comes at no additional cost to you.
Or you can buy me a coffee via paypal and support me on Patreon.